MIL-PRF-83383E
APPENDIX A
ELECTRONIC COMPONENTS
A. SCOPE
A.1 Scope. This appendix establishes requirements for an electronic component evaluation system for Remote
Control Circuit Breakers (RCCB) manufactured in accordance with this specification. The manufacturer shall have a
program for assessing the quality and reliability of component parts used in RCCBs. The following system is one way
of achieving this requirement. This appendix is a mandatory part of the specification. The information contained
herein is intended for compliance.
A.2 APPLICABLE DOCUMENTS
SPECIFICATIONS
DEPARTMENT OF DEFENSE
-
Semiconductor Devices, General Specification for.
-
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
STANDARDS
DEPARTMENT OF DEFENSE
- Test Methods and Procedures for Microelectronics.
HANDBOOKS
DEPARTMENT OF DEFENSE
- General Guidelines for Electronic Equipment.
A.3 REQUIREMENTS
A.3.1 General requirements.
A.3.1.1 Alternative system requirements. The manufacturer has the option to use alternative methods for
achieving the general requirements of the component evaluation system specified herein.
A.3.2 Electronic components. It is suggested that MIL-HDBK-454 be used for guidance only in component
selection.
A.3.3 Discrete semiconductor devices. Pertinent characteristics (electrical, physical, mechanical, quality, reliability)
of the semiconductor devices shall be addressed. JAN, JANTX, JANTXV semiconductors in accordance with MIL-
PRF-19500 are preferred. When non-QPL semiconductors are selected, the RCCB manufacturer shall address
requirements for assessing the quality and reliability of the component and the component supplier. When assessing
the quality and reliability of non-QPL devices, MIL-PRF-19500 should be used as a guide. Non-QPL parts shall be
screened by the RCCB manufacturer to the extent which satisfies the performance requirements and product
characteristics as specified herein for the RCCB.
A.3.4 Microcircuits. Pertinent characteristics (electrical, physical, mechanical, quality, reliability) of the
microcircuits shall be addressed. Standard Microcircuit Drawing (SMD) and QML devices (in accordance with MIL-
PRF-38535) are preferred. When non-SMD or non-QML devices are selected, a device compliant with applicable
requirements of MIL-STD-883 is preferred. When nonstandard microcircuits are selected, the RCCB manufacturer
shall address requirements for assessing the quality and reliability of the devices and device supplier. When
assessing the quality and reliability of nonstandard microcircuits, the aforementioned military documents should be
used as a guide. Non-SMD or non-QML devices shall be screened by the RCCB manufacturer to the extent which
satisfies the performance requirements and product characteristics as specified herein for the RCCB.
34
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business