INCH-POUND
MIL-DTL-24347B
30 April 2002
SUPERSEDING
MIL-M-24347A(SH)
10 February 1989
DETAIL SPECIFICATION
MONITOR, AVAILABLE LOAD, 60 AND 400 HERTZ, A.C.,
1 PHASE, ELECTRICAL POWER
(NAVAL SHIPBOARD USE)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers an available load monitor (ALM-2) to be used for sensing a load on either a
115 or 440 volt single phase circuit of either 60 or 400 hertz (Hz). ALM-2 is a direct replacement for ALM-1. ALM-1
is not to be procured for new constructions or replacement purposes.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-S-901
- Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment and Systems,
Requirements for.
MIL-E-917
- Electric Power Equipment, Basic Requirements (Naval Shipboard Use).
MIL-E-2036
- Enclosures for Electric and Electronic Equipment.
MIL-DTL-15024
- Plates, Tags and Bands for Identification of Equipment. General Specification for.
MIL-P-15024/5
- Plates, Identification.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC/VAT, Post
Office Box 3990, Columbus, OH 43216-5000, by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5925
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business