MIL-DTL-17361G(SH)
e.
Current rating.
f.
Title, number, and date of the applicable specification sheet (see 3.1).
g. Whether selected parts (circuit breaker housing excluded) may be made from thermoplastic material (see
3.5.11).
h.
Wire coating requirements if other than as specified (see 3.5.20.2).
i.
Sockets requirements if other than as specified (see 3.5.20.3).
j.
Whether a handle locking device is required (see 3.5.19.7).
k.
Mounting requirements (see 3.5.18.2).
l.
Adjustable instantaneous trip settings (see 3.5.16.1.2).
m. Adjustable short-time delay pickup and STD (see 3.5.16.2.4).
n.
Current limiting fuse units (see 3.5.17.2).
o.
Whether an electric operating mechanism is required (see 3.5.19.3).
p.
Nominal and operating voltage range for undervoltage tripping devices (see 3.5.19.4).
q.
Whether a shunt trip device is required (see 3.5.19.5).
r.
Voltage of shunt trip device (see 3.5.19.5).
s.
Whether an auxiliary switch is required (see 3.5.19.6).
t.
Whether mounting bases/blocks are required (see 3.5.18.1).
u.
Whether a handle boot is required (see 3.5.19.8).
v.
Creepage and clearance distances, if other than as specified (see 3.4.1).
w. When master drawings are required (see 3.3).
x.
EMI control requirements, if other than as specified (see 3.4.10).
y.
Endurance test requirements, if other than as specified.
z.
Qualification test reports (see 4.2.4).
aa. Conformance inspection sampling requirements, if other than as specified (see 4.4.1).
bb. Requirements for rework and suspension of shipment of circuit breakers when circuit breakers do not meet
acceptance criteria (see 4.4.2 and 4.4.3.4).
cc. Packaging requirements (see 5.1).
dd. Provisioning requirements (see 6.5).
ee. Technical manual requirements (see 6.6).
6.3 Qualification. With respect to products requiring qualification, awards will be made only for products
which are, at the time of award of contract, qualified for inclusion in qualification data set (QDS) No. 17361 whether
or not such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from
Commander, Naval Sea Systems Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington
Navy Yard DC 20376-5160 or emailed to CommandStandards@navy.mil.
6.4 Definitions. Definitions of various technical terms wherever such terms appear in this specification are in
accordance with NEMA Standards Publication AB-1, except as noted below.
6.4.1 AQB circuit breaker. An AQB circuit breaker is a molded case circuit breaker with a trip unit installed.
6.4.2 Attachments. Attachments are accessories or features that enhance the capability of the circuit breaker
but are not required for manual operation or to provide overcurrent protection.
36
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business