INCH-POUND
W-C-375/13B
12 June 2009 SUPERSEDING W-C-375/13A
04 August 2004
FEDERAL SPECIFICATION SHEET
CIRCUIT BREAKERS, MOLDED CASE, BRANCH CIRCUIT AND SERVICE, TYPE I, SERIES TRIP, SINGLE POLE (15 THROUGH 50 AMPERES)
W-C-375/13 is inactive for new design and is no longer used, except for replacement purposes.
The General Services Administration has authorized the use of this federal specification sheet by all federal agencies.
The complete requirements for procuring circuit breakers described herein shall consist of this document and the latest issue in effect of W-C-375.
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Tolerance is ±.01 (0.25 mm) for two-place decimals and ±.005 (0.13 mm)
for three-place decimals.
4. Terminal lugs shall accept #14 to #4 AWG wire and shall be suitable for aluminum (AL) or copper (CU) wire.
FIGURE 1. Interface and physical dimensions.
AMSC N/A FSC 5925
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business