MIL-DTL-23928G
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (Ship Systems)
-
Requirements for Welding and Brazing Procedure and Performance
Qualification.
-
Requirements for Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels.
(Copies of these documents are available from https://www.navsea.navy.mil, or the Commander Naval Sea
Systems Command, 1333 Isaac Hull Avenue, SE Stop 5160, Washington Navy Yard DC 20376-5160).
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract
(see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
-
Copper-Silicon Alloy Rod, Bar, and Shapes.
-
Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar and
Shapes.
-
Rod, Copper-Zinc-Silicon Alloy.
-
Copper-Nickel-Silicon Alloy Rod and Bar.
-
Standard Specification for Electrodeposited Coatings of Silver for Engineering
use.
-
Compounds, Molding, Thermosetting.
(Copies of these documents are available online at https://www.astm.org or from the American Society for Testing
Materials, 100 Barr Harbor Drive, West Conshohocken. PA 19428-2951).
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
-
Measurement Management Systems - Requirements for Measurement
Processes and Measuring Equipment.
-
General Requirements for the Competence of Testing and Calibration
Laboratories.
(Copies of this document is available online at https://www.iso.org/iso/home.html or from the American National
Standards Institute (ANSI), 1899 L Street, NW, 11th Floor, Washington, DC 20036-3801).
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
-
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings.
(Copies of these documents are available online at https://www.sae.org/ or from the Society of Automotive
Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of conflict between the text
of this document and the references cited herein (expect for related specification sheets), the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business