MIL-DTL-23928G
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The panels are intended to be used for power and lighting distribution on ships where conditions
of mechanical shock and salty atmosphere are encountered.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of the specification.
b.
ASSIST Online database should be cited in the solicitation, and if required, the specific issue of individual
documents referenced. If not otherwise specified, the versions of the individual documents referenced will
be those in effect on the date of release of the solicitation (see 2.).
c.
Packaging requirements (see 5.1).
d.
Title, number, and date of applicable specification sheet and applicable dash numbers (see 3.1).
e.
Types and classes required (see 1.2).
f.
Details of the variations from the specification for special panels (see 3.1.1).
g.
Specify testing in accordance with 4.5.6 if application is in a salt atmosphere.
h.
If circuit breakers are to be furnished with panels (see 3.3.5).
i.
Type of circuit breaker bases or blocks required (see 3.3.6).
j.
Size of lugs, if required (see 3.3.8).
Painting, if other than specified (see 3.3.13).
k.
l.
Marking format, information, and location (see 3.3.14).
m. If circuit information plates are required (see 3.3.14).
n.
Enclosure material if other than aluminum (see 3.4.1).
o.
If door is not required (see 3.4.1.1).
p.
Location of door hinge if other than right side (see 3.4.1.1).
q.
Identify panel top and bottom if required for special panels (see 3.4.1.3).
r.
If cable plates are not required (see 3.4.1.4).
s.
Size and location of holes in bus bar extensions if required (see 3.4.3.4).
17
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business