W-C-375/16C
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.031 |
0.79 |
.344 |
8.74 |
1.125 |
28.58 |
2.562 |
65.07 |
.062 |
1.57 |
.375 |
9.53 |
1.250 |
31.75 |
2.625 |
66.68 |
.078 |
1.98 |
.469 |
11.91 |
1.375 |
34.93 |
2.750 |
69.85 |
.094 |
2.39 |
.500 |
12.70 |
1.406 |
35.71 |
2.938 |
74.63 |
.125 |
3.18 |
.625 |
15.88 |
1.656 |
42.06 |
3.188 |
80.98 |
.138 |
3.51 |
.656 |
16.66 |
1.875 |
47.63 |
3.375 |
85.73 |
.172 |
4.37 |
.688 |
17.48 |
1.969 |
50.01 |
3.500 |
88.90 |
.188 |
4.78 |
.750 |
19.05 |
2.062 |
52.37 |
3.969 |
100.81 |
.219 |
5.56 |
1.000 |
25.40 |
2.219 |
56.36 |
4.500 |
114.30 |
.250 |
6.35 |
1.094 |
27.79 |
2.344 |
59.54 |
6.000 |
152.40 |
.312 |
7.92 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Tolerance is ±.01 (0.25 mm) for two-place decimals and ±.005 (0.13 mm) for three-place decimals.
4. Line and load terminals shall accept and be suitable for no. 14 through no. 1/0 copper (CU) or aluminum (AL) wire.
FIGURE 1. Interface and physical dimensions - Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business