MIL-DTL-17361G(SH)
MIL-DTL-15024
-
Plates, Tags, and Bands for Identification of Equipment, General
Specification for
MIL-P-15024/5
-
Plates, Identification
MIL-PRF-15160
-
Fuses: Instrument, Power, and Telephone, General Specification for
MIL-T-16315
-
Transformers, Power, Step-Down (Miscellaneous, Naval Shipboard Use)
MIL-DTL-83734
-
Sockets, Plug-in Electronic Components, Dual-In-Line (DIPS) and Single-
In-Line Packages (SIPS), General Specification for
(See supplement 1 for list of specification sheets.)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of U.S. Military Property
MIL-STD-167-1
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II Internally Excited)
MIL-STD-461
-
Requirements for the Control of Electromagnetic Interference
Characteristics of Subsystems and Equipment
MIL-STD-1399-300
-
Interface Standard for Shipboard Systems, Section 300, Electric Power,
Alternating Current (Metric)
MIL-STD-1686
-
Electrostatic Discharge Control Program for Protection of Electrical and
Electronic Parts, Assemblies and Equipment (Excluding Electrically
Initiated Explosive Devices)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
U.S. GENERAL SERVICES ADMINISTRATION
GSA Global Supply Catalog
(Copies of this document are available from GSA Global Supply, 501 W. Felix Street, Ft. Worth, TX 76115 or
online at www.gsa.gov.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUE (ANSI)
ANSI/IEEE C37.09
-
Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical
Current Basis (DoD adopted)
(Copies of this document are available from the American National Standards Institute, Inc., 25 West 43rd
Street, 4th Floor, New York, NY 10036 or online at www.ansi.org.)
ASTM INTERNATIONAL
ASTM B700
-
Standard Specification for Electrodeposited Coatings of Silver for Engineering
Use
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business