MS24571J
Ltr |
Inches |
mm |
||
Min |
Max |
Min |
Max |
|
A |
.120 |
--- |
3.048 |
--- |
B |
.187 |
.249 |
4.75 |
6.32 |
C |
.340 |
.370 |
8.64 |
9.40 |
D |
.690 |
.750 |
17.526 |
19.050 |
E |
2.340 |
2.400 |
59.36 |
60.960 |
F |
2.150 |
2.210 |
54.610 |
56.134 |
G |
1.160 |
1.220 |
29.464 |
30.988 |
H |
.564 |
.624 |
14.326 |
15.850 |
J |
.500 |
.532 |
12.70 |
13.51 |
K |
.060 |
.120 |
1.524 |
3.048 |
L |
.402 |
.432 |
10.21 |
10.97 |
M |
.453 |
.483 |
11.51 |
12.27 |
N |
.031 |
--- |
.78 |
--- |
p |
.312 |
--- |
7.92 |
--- |
R |
.900 |
.912 |
22.86 |
23.16 |
S |
--- |
2.189 |
--- |
55.60 |
T |
1.800 |
1.820 |
45.72 |
46.23 |
U |
--- |
.760 |
--- |
19.30 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ± .030 (0.762 mm). Angles ±2°.
4. In the event of a conflict between the text of this standard and the references sited herein, the text of this standard shall take precedence.
5. Referenced Government documents listed in the Department of Defense ASSIST Online database form a part of this standard to the extent specified herein.
6. part or identifying number:
MS number dash number (see table I and note 7.)
7. For dash numbers ending with "V", the vibration test methods shall be as follows: Operating: Method 204, Condition C of MIL-STD-202.
Nonoperating: Method 204, Condition B of MIL-STD-202.
8. .250 Min. Typ. clearance from center line of screw to case.
9. The terminals shall not be moveable with respect to case.
10. The terminals shall not be identified as to "line" or "load".
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business